Guide 06 / 17
Guide 06 of 17 6 min read

2-Part Plunger & Floating Embosser Stamp Sets

Eliminate crooked stamping and trapped clay suction with matched outer blade + independent sliding plunger sets engineered to 0.6 mm clearance.

# Why Makers Use 2-Part Plunger Sets

Deeply detailed designs are notorious for sticking inside solid-backed one-piece imprint cutters. By switching Tool Type to 2-Part Stamp, CutClay separates the job into two perfectly nested parts:

  1. An open-top outer cutter with a standard 0.4 mm cutting tip and zero enclosed backing plate—meaning you cut the shape first, lift the frame or leave it aligned as a sliding fence, and clear waste clay effortlessly.
  2. An inset embossing plunger stamp contoured to glide neatly inside the outer cutter cavity and compress clay to an exact uniform depth before pushing the finished earring cleanly out the bottom.
Export both the open outer cutter and the calibrated sliding plunger side-by-side ready to slice flat.

# Calibrating Sliding Clearance (0.3 – 1.2 mm)

Because every 3D printer exhibits slight corner swell, horizontal expansion, or seam variation, tolerance determines whether a plunger glides like butter or binds tight.

The default 0.6 mm Sliding Clearance shrinks the inner stamp envelope away from the interior cutting wall by 0.6 mm all around—tuned specifically for standard 0.4 mm nozzle PLA prints. If your filament prints wide, bump clearance to 0.7–0.8 mm; on high-precision resin or finely tuned CoreXY printers, you can tighten to 0.45–0.5 mm.

Parameter / Control Range / Options Default Maker Notes
Sliding Clearance 0.30 – 1.20 mm 0.60 mm Clearance gap per side between outer blade inner wall and plunger perimeter.
Clay Slab Thickness 1.5 – 4.0 mm 2.5 mm Auto-calculates plunger shaft travel (Blade Depth - Clay Thickness) for Depth-Stop mode.
Relief Depth 0.5 – 3.5 mm 1.5 mm Height of textured face features rising below the plunger plate.

# Depth-Stop Plunger vs. Flat Insert Style

Choose between two ergonomic plunger styles depending on your workflow:

  • Depth-Stop Plunger: Includes a stepped top brim flange that physically rests on top of the cutter rim when fully depressed. Even across 50 earrings in a production batch, every stamp hits identical pressure and depth—and both halves print upside-down/upright completely flat with zero supports.
  • Flat Insert: Produces a compact 3.0 mm drop-in stamp plate when you want low filament usage or hand-controlled press pressure without an upper stopper lip.

# Clay Thickness Stops & Suction Prevention

Set Clay Slab Thickness (1.5 – 4.0 mm) to match your pasta machine thickness number. CutClay automatically tunes the Depth-Stop plunger shaft (max(3.0, Blade Depth - Clay Thickness) mm) so downward stroke halts right where relief meets clay cleanly. The built-in circumferential air clearance prevents plunger vacuum deformation when lifting off delicate raw clay.