2-Part Plunger Clay Cutter & Embosser Stamp Maker

Generate synchronized two-piece tool sets — a sharp 0.4mm outer cutting blade paired with a vented, floating inner plunger embosser calibrated with 0.6mm sliding clearance.

2-part clay cutter and matching floating inner plunger stamp in CutClay Studio

Cut cleanly first. Emboss crisp details second.

Say goodbye to squashed earring rims and clay trapped inside fixed imprint wells.

1

Pick a Layered Motif or Sketch

Load any dual-layer botanical, floral, mug-rug, or character artwork from CutClay’s catalog or upload your own multi-path SVG.

2

Choose 2-Part Plunger & Deboss/Cameo

Toggle between recessed Deboss lines or puffy Cameo relief, set plunger height and handle flange, and preview both parts side-by-side on the plate.

3

Export Multi-Object 3MF or STL

Download both matched pieces nested with calibrated 0.6mm clearance so the stamp slides freely inside the outer cutter on standard FDM printers.

Why 0.6mm sliding clearance and air vents solve clay distortion

When a cutter and inner detail stamp are fused into one rigid block, pressing deep enough to transfer petals forces clay sideways — bulging the outer silhouette or suction-locking the earring inside the cutter walls.

CutClay decouples the 0.4mm outer cutter from a floating inner plunger offset inward by calibrated clearance (0.6mm default), complete with top depth-stop flanges and integrated air-release vents. Press the outer perimeter first, gently plunge the inner stamp second, and lift cleanly with crisp 3D relief.

2-Part Plunger CAD specs & print checklist

Engineered tolerances tuned for Bambu Lab, Prusa, and Creality 0.4mm nozzles.

FeatureDefault Engineering SpecWorkshop Benefit
Outer Cutting Blade0.4mm razor tip + 0.8mm–1.2mm tapered wallMinimal clay displacement — almost zero post-bake edge sanding
Plunger Slide Clearance0.6mm radial clearance (adjustable)Eliminates friction binding from normal FDM horizontal expansion
Relief ModesDeboss (recessed lines) & Cameo (raised pad)Match heirloom ceramic medallions or bold puffy botanical studs
Air-Release VentingRecessed vent paths in plunger backplateStops vacuum suction from tearing soft clay edges when pulling back
Layer Height & Ironing0.12mm–0.16mm + Top-Surface IroningMirror-smooth stamp faces release without cornstarch buildup

2-Part Plunger Stamp FAQs

Why use a 2-part floating plunger instead of a fixed imprint cutter?

Decoupling the outer 0.4mm cutting blade from the inner plunger lets you cut cleanly first, emboss details second, and release clay gently without squashing petals or outer rims.

What sliding tolerance keeps the plunger moving smoothly without binding?

CutClay calibrates 0.6mm lateral clearance by default, leaving enough margin for 0.4mm FDM line tolerances so the plunger glides effortlessly inside the outer sleeve.

What is the difference between Deboss and Cameo stamp modes?

Deboss presses thin recessed lines into a flat clay surface, while Cameo produces a sculpted raised pillow effect around engraved details.

Why do plunger stamps have air-release vent slots?

Sealing soft clay against a solid flat stamp traps air pockets; vents equalize pressure when you press and pull away so fine embossed ridges never tear.

Generate matched cutter + plunger sets in 5 seconds

Inspect both 3D pieces, test Cameo vs Deboss live, and export watertight print-ready files.

Open 2-Part Stamp Studio Free →