Clay Cutter Mode: 3-Tier Blade, Draft Angle & Ergonomic Handle
Master the engineered 3-tier blade cross-section that pairs a razor-clean 0.4 mm cutting column with a rigid 1.2 mm support wall, outward suction-free draft taper, and reinforced press handle.
# Target Size & Clay Shrinkage Calibration
Target Size controls the longest outer dimension (width or height) of your cut clay piece from 10 mm to 100 mm, with a real-time equivalent display in inches (for example, 35 mm = 1.38") and instant quick-size buttons (Mini 20 mm, S 30 mm, M 35 mm, L 40 mm, XL 50 mm).
Unlike uniform CAD scaling that inflates blade walls alongside silhouette width, changing Target Size keeps your cutting tip at a strict 0.4 mm so studs and large statement cutters slice equally sharp.
For stoneware, porcelain, or metal clay that shrinks during firing, compute the compensated wet size first on our Clay Shrinkage Calculator (Finished mm / (1 - Shrinkage%)) and enter the raw size directly into Target Size.
| Parameter / Control | Range / Options | Default | Maker Notes |
|---|---|---|---|
| Target Size | 10 – 100 mm |
35 mm | 10–18 mm for studs, 25–38 mm for everyday earrings, 40–65 mm for statement dangles. |
| Quick Size Bar | 20, 30, 35, 40, 50 mm |
M (35 mm) | Single-click jumps across standard jewelry earring proportions. |
# Blade Profile Bar Presets
Above the Blade accordion sits the Blade Profile Bar, separating printer and nozzle calibration from whichever shape silhouette you pick. Switch effortlessly between calibrated factory profiles or save your own named studio recipes:
- 0.4mm Standard PLA:
12.0 mmdepth,0.4 mmtip,3.0 mmsharp edge,1.2 mmsupport wall,0.0°draft. - 0.2mm Micro-Detail:
10.0 mmdepth,0.25 mmtip,2.2 mmsharp edge,0.8 mmsupport wall,1.5°draft—built for delicate filigree studs printed with 0.2 mm nozzles. - Soft Clay Anti-Stick: Adds a
2.5°outward draft taper to release tacky freshly conditioned polymer clay with zero vacuum pull. - Ceramic / Thick Slab: Reinforced
18.0 mmdepth,0.6 mmedge, and1.6 mmwall for stiff stoneware and leather-hard porcelain slabs.
# Blade Depth (Height)
Measured vertically from the top face of the handle base up to the cutting tip (5 – 25 mm, default 12.0 mm). Standard jewelry polymer clay sheets rolled through a pasta machine are 2.0 – 3.0 mm thick, so 12 mm gives plenty of overhead travel and keeps knuckles off the clay slab.
# Cutting Edge Tip Width
Controls the thickness at the top cutting rim (0.2 – 1.5 mm, default 0.4 mm). Matching 0.4 mm to a standard 0.4 mm brass/steel printer nozzle produces a continuous single-extrusion-wide razor edge with clean slicing paths.
# Support Wall Thickness
Defines the lower vertical reinforcement belt between the handle flange and the sharp column (0.4 – 3.0 mm, default 1.2 mm). At 1.2 mm, a 0.4 mm nozzle lays down three fused perimeter loops—eliminating flex even when cutting firmer clay colors.
# Inner Wall Thickness (Hollow Shapes & Stamps)
Controls line thickness on interior cutout blades and recessed imprint walls (0.4 – 2.0 mm, default 0.4 mm). Keeping inner walls slender ensures small window pockets and fine floral veins displace minimal clay and demold cleanly.
# Outward Release Draft Angle
CutClay applies taper strictly outward from the true inner cutting contour (0° – 8°, default 0.0°). Your cut shape boundary never shrinks or distorts inward; instead, the outer wall slopes gently so pressed clay slides free with far less distortion and sticking.
| Parameter / Control | Range / Options | Default | Maker Notes |
|---|---|---|---|
| Depth | 5.0 – 25.0 mm |
12.0 mm | 12mm for polymer clay earrings; 16–20mm for thick ceramics/cookies. |
| Tip Width | 0.2 – 1.5 mm |
0.4 mm | Set equal to printer nozzle diameter (or enables Arachne thin-wall). |
| Sharp Edge Height | 0.1 – 10.0 mm |
3.0 mm | Set >= slab thickness (3.0mm clears Pasta #1–#3 slabs cleanly). |
| Thickness (Support Wall) | 0.4 – 3.0 mm |
1.2 mm | Multiples of 0.4mm (0.8mm or 1.2mm) slice cleanly with zero gap fill. |
| Draft Angle | 0.0° – 8.0° |
0.0° | 1.5°–3.0° noticeably reduces clay suction without inflating footprint. |
# Ergonomic Handle, Height, Width & Pro Fillet
A flat pressing flange makes hours of batch cutting comfortable on your fingers while keeping the cutter perimeter dead-flat on the print bed:
- Handle Height (1.0 – 8.0 mm, default 3.0 mm): Vertical base thickness resisting bow and torsion under pressure.
- Handle Width (1.0 – 8.0 mm, default 3.0 mm): Horizontal outward brim extending past the outer wall.
- Fillet Rounding (0.0 – 3.0 mm, default 1.0 mm): Smoothly curves the 90° corner where the vertical wall meets the handle brim—removing the primary layer-delamination stress riser so cutters survive years of studio use.
# Size Tag on Handle & Shop Brand Name
Never mix up 25 mm and 30 mm cutters in your storage drawers again. Toggle Size Tag on Handle to automatically emboss the millimeter badge onto the front brim tab. Pro subscribers can also enter up to 16 uppercase characters in Shop / Brand Name to mold custom workshop branding directly onto the cutter base.
# Center Bars & Floating Islands
Hollow silhouettes such as hoops, rainbows, donuts, and uppercase letters contain floating interior cutter rings. Unless bridged across the base handle, those inner blades will print as loose pieces.
Open Inner Cutouts & Bonus Studs and enable Center Bars (Horizontal/Vertical width 0 – targetSize mm, default 6 mm), plus Skip decorative holes when you want bars routed cleanly without blocking negative-space cavities. Or turn on Separate Inner Shapes to turn hollow cutouts into extra mini stud cutters.