Nutcrackers, Bauble Ornaments & Christmas Clay Cutters
Open calibrated Nutcracker suites, heirloom Bauble ornaments with built-in 3.6mm ribbon bores, snowflake filigree stamps, and ribbon bows directly inside CutClay 3D Studio — resize to exact millimeter specs and export print-ready STL or 3MF files in seconds.
8 Holiday Presets: Click to Customize in 3D Studio
Each preset loads with factory-calibrated blade taper, single-line imprint relief, or sliding 2-Part plunger clearance ready for Bambu, Prusa, or Creality 0.4mm nozzles.
Nutcracker King Statement Cutter
Crisp crown flutes, sculpted cape folds, and recessed facial guides tuned cleanly for polymer studs, brooches, and heirloom tree ornaments.
Nutcracker Ballerina Character
Balanced pointe-shoe and tutu rib geometry keeps fine fabric pleats legible after baking and antique acrylic washes.
Saluting Nutcracker Guard
Clean military shako hat, belt clasp, and open uniform rib geometry pair smoothly with small brass hoop findings.
Drummer Nutcracker Ornament
Generous open spacing around drum sticks and jacket frog-loops avoids clay pinching during soft-slab release.
Tree Bauble Engraved Ornament
Includes a reinforced 3.6 mm top ribbon bore surrounded by at least 2.15 mm of solid clay collar for satin or velvet ties.
Heart Bauble Medallion
Combine deep debossed garland rings with gold mica rub or white acrylic antiquing after a 45-minute batch cure.
Hexagon Crystal Snowflake
Built with a decoupled 0.4 mm hexagonal blade and 0.6 mm-clearance sliding plunger with air vents for delicate ice branches.
Coquette Holiday Ribbon Bow
Works solo for dainty velvet-red studs or pairs directly as a Stud Topper above Bauble or Nutcracker drops via Auto-Center Pins.
Engineering specs & slicer tolerances for holiday cutters
Engineered specifically for crisp filament paths on standard 0.4mm FDM brass and hardened steel nozzles.
| Holiday Tool Feature | CutClay Calibrated Spec | Bench Printing Advantage |
|---|---|---|
| Character Cutting Edge | 0.40 mm razor tip + 0.8–1.2 mm bevel wall | Cleans out crisp hats, boots, and ornament curves with almost no post-bake sanding |
| Bauble Ribbon Bore | 3.6 mm cylindrical punch • ≥2.15 mm clay border | Velvet ribbon and baker’s twine thread cleanly without snapping cured ornament tops |
| Delicate Snowflake Mode | 0.60 mm plunger slide gap + air vents | 2-Part Plunger ejects narrow crystal tips straight onto parchment without warping |
| Stud Batching | Stud Gang Array (1x2, 2x2, 2x3) + 3MF nesting | Pack miniature Nutcrackers, bows, and holly tops flat onto one Bambu or Prusa plate |
3 Free STL/3MF Exports • Pro Commercial License
Test any Nutcracker, Bauble, or custom SVG cutter free with 3 STL exports. Need unlimited holiday batching and commercial license rights? Save with November codes NOVPRO20 ($39.20/year) or NOVLIFE149 ($149 Lifetime one-time).
Christmas & Nutcracker Cutter FAQs
Are the Nutcracker clay cutters printable on a standard 0.4mm FDM nozzle?
Yes. Every CutClay Nutcracker silhouette (including Nutcracker King, Ballerina, Saluting Guard, and Drummer) uses calibrated 0.40 mm cutting tips, smooth tapered support walls, and clean minimum spacing between recessed facial and uniform ribs so standard Bambu Lab, Prusa, and Creality printers slice crisp detail.
What ornament hole size fits velvet ribbon or baker’s twine?
CutClay’s engraved Bauble Ornament series (ornaments_025 through ornaments_037) includes an integrated 3.6 mm top ribbon bore reinforced with at least 2.15 mm of solid surrounding clay so tree ornaments hold twine, cord, or velvet ties cleanly without snapping.
Should I choose Cutter, Imprint Cutter, or 2-Part Plunger Stamp for holiday characters?
Use Imprint Cutter when you want fast single-pass cuts with crisp debossed uniform and crown lines, switch to 2-Part Plunger Stamp for sticky metallic clays or intricate snowflakes where an independent sliding ejector keeps edges sharp, or choose Cutter for plain painted outlines.
Can I sell Christmas earrings and baked ornaments made with CutClay files?
Yes. Pro and Lifetime members receive a commercial license to craft and sell finished polymer clay and ceramic pieces made with exported CutClay cutters, stamps, rollers, and stencils, as well as sell physical 3D-printed cutters.
Step-by-Step Illustrated Documentation
Explore exact millimeter parameters, Retina Studio walkthroughs, and 3D slicer settings — or browse all 17 visual guides.
Guide 05Imprint Cutter Mode
Cut the outer earring outline and press intricate interior artwork into raw clay in one downward motion using calibrated recessed ribs.
Guide 062-Part Plunger Stamp
Eliminate crooked stamping and trapped clay suction with matched outer blade + independent sliding plunger sets engineered to 0.6 mm clearance.
Guide 07Texture Roller & Flat Mat
Wrap botanical, geometric, or lace patterns 360 degrees around support-free upright cylinders with optional thickness rails, or flip to Flat Texture Mats with Brick Drop and Mirror tiling.
Build your 2026 holiday bench collection
Customize millimeter sizes live in 3D, check your cut on clay slabs, and slice print-ready STL or 3MF files.
Open Nutcracker Studio Free →