Ceramic & Polymer Clay Shrinkage Calculator

Calculate exact raw 3D cutter dimensions before printing so fired stoneware, porcelain, earthenware, or cured metal clay hits your target millimeter size.

Required Raw Cutter Size
45.5 mm
Exact: 45.45 mm • Scale factor: 1.136× (oversize +5.5 mm)

Reference clay body shrinkage rates

Use the manufacturer wet-to-fired test bar figure when available, or start with these shop benchmarks before slicing.

Clay BodyTypical ShrinkageRaw Cutter Scale FactorCommon Use
Polymer Clay (Sculpey, Cernit, Fimo)1% – 2%1.010× – 1.020×Earrings, pendants, matched stud pairs
Earthenware (Cone 04–06)5% – 7%1.053× – 1.075×Terracotta tiles, tags, low-fire medallions
Mid-Fire Stoneware (Cone 5–6)11% – 13%1.124× – 1.149×Ceramic ornaments, spoon rests, textured plates
Porcelain (Cone 10)13% – 15%1.149× – 1.176×Fine translucent jewelry charms & inlays
Silver Metal Clay (999)8% – 10%1.087× – 1.111×Torch-fired or kiln-fired fine silver earrings