Multi-Piece Dangle Composer & Jump-Ring Punch Holes
Stack matching stud toppers, middle connectors, and main drops cleanly aligned along a central axis, pierce calibrated jump-ring holes on every tier, and preview metallic jewelry findings.
# Stacking 2-Piece & 3-Piece Statement Earrings
Designing cohesive multi-tier dangle earrings usually requires exporting three separate files and eyeballing proportions on your tile. Expand Multi-Piece Dangle Composer in Cutter or Imprint mode to stack a complete jewelry assembly in one file:
- Tier 1 — Stud Topper (
8 – 26 mm, default12 mm): Select from curated topper silhouettes (Circle Stud, Daisy Stud, Teardrop Top, Arch Top, Crescent, Hexagon) with a calibrated bottom jump-ring piercing pin automatically generated. - Tier 2 — Optional Middle Connector (
10 – 30 mm, default16 mm): Toggle Add Middle Connector Tier (3-Piece Set) to insert an intermediate link complete with both top and bottom aligned piercing pins. - Tier 3 — Your Main Drop (
Target Size): Anchored cleanly along the centerX = 0vertical axis beneath the stack with matching top hole alignment.
# Jump-Ring Punch Holes (Standalone or Multi-Piece)
When enabled via the Jump-Ring Punch Hole accordion (or automatically synced in Dangle Composer), CutClay anchors a cylindrical piercing post directly onto the handle bridge (flush at blade tip level) so every pressed clay piece comes off your tile already punched cleanly for assembly.
| Parameter / Control | Range / Options | Default | Maker Notes |
|---|---|---|---|
| Hole Diameter | 1.2 – 3.0 mm |
1.8 mm | 1.6–1.8mm fits standard 20G/18G (0.8–1.0mm) wire and 4–6mm jump rings cleanly. |
| Anchor Position | Top Left, Top, Top Right, Bottom |
Top | Places the hole automatically along the optimal interior perimeter edge. |
| Edge Margin | 1.0 – 8.0 mm |
2.2 mm | Minimum 2.0–2.5mm margin prevents baked clay holes from tearing under hardware tension. |
| Horizontal Offset | -15 to +15 mm |
0 mm | Shifts piercing off-center on asymmetrical leaves, waves, or crescent moons. |
# Gold, Brass & Sterling Silver Hardware Preview
Switch the preview toolbar to Clay Slab and pick between Raw Brass, 14k Gold, or Sterling Silver under Hardware Preview. Studio renders accurate metallic jump rings linking your baked tiers so you can test colorway harmony and save high-res listing mockups before firing clay.